Laser Rangefinder Filters

Bandpass filters from 520 to 940 nm, cut to fit compact modules

Thin Bandpass Filters for Laser Rangefinder Modules

Bandpass Filters Matched to Your Rangefinder Laser

A rangefinder times a laser pulse to the target and back. A bandpass filter in front of the receiver stops daylight and room light swamping the return.

We make rangefinder filters at 520, 635, 650, 808, 905 and 940 nm, with peak transmission of 90% or 95%.

Typical designs are 30 to 120 nm wide, and we can go from 10 to 150 nm. Blocking is OD3 or OD4.

Filters are cut to your drawing. Standard thicknesses are 0.33, 0.55, 0.7, 1.0 and 1.1 mm, for compact modules.

Filters for 1,064 nm and eye-safe 1,550 nm rangefinders can be polished to 1/10-wave transmitted wavefront with parallelism within a few arc seconds, so they do not degrade the receiver optics.

Thin Rangefinder Filters with a Size ReferenceP01 · IMAGE PENDINGThin rangefinder filters with a size reference

For long-range systems at 1,064 or 1,550 nm, see our LiDAR filters. Learn more

What Matters in a Rangefinder Filter

Width. Laser diodes vary from part to part and shift with temperature; a 905 nm diode typically moves about 0.3 nm per °C. A handheld unit used outdoors needs a passband wide enough to hold its laser all year.

Blocking. The receiver sees everything its detector responds to. OD3 suits most units; OD4 helps in bright sunlight or where the receiver gain is high.

Size. Rangefinder modules are small and often molded or bonded. Thin glass from 0.33 mm, cut to your outline, saves space in the receiver path.

Choosing by Laser Wavelength

635 and 650 nm. Red lasers are typical in handheld distance meters and construction tools, where the user sees the spot. Our designs run from 30 to 80 nm wide at 635 nm and 30 to 120 nm at 650 nm.

Figure: Measured spectra of six rangefinder filter designs.

520 nm. Green lasers are easier to see in daylight. Our 520 nm design is 30 to 60 nm wide.

905 and 940 nm. Invisible pulsed lasers are often used in outdoor, golf and hunting rangefinders, where range matters more than a visible spot. Both designs are 30 to 60 nm wide.

1,064 nm. For longer ranges, a 40 nm wide 1,064 nm filter passes more than 92% with OD6 blocking from 200 to 950 nm. bp1064 40 od6

808 nm. Used where a near-infrared diode is preferred. Our design is 30 to 60 nm wide.

Rangefinder Filter Designs

Design CWL (nm) FWHM (nm) Peak T Blocking
BP520 520 ± 5 30–60 ≥ 90% or ≥ 95% OD3 or OD4
BP635 635 ± 5 30–80 ≥ 90% or ≥ 95% OD3 or OD4
BP650 650 ± 5 30–120 ≥ 90% or ≥ 95% OD3 or OD4
BP808 808 ± 5 30–60 ≥ 90% or ≥ 95% OD3 or OD4
BP905 905 ± 5 30–60 ≥ 90% or ≥ 95% OD3 or OD4
BP940 940 ± 5 30–60 ≥ 90% or ≥ 95% OD3 or OD4

Each design is set to your laser’s exact wavelength and bandwidth within these ranges. Ask us for the curves and for filters in stock.

What to Send Us

  • Laser wavelength and its tolerance
  • Operating temperature range
  • Indoor, outdoor or both
  • Detector type
  • Outline drawing and thickness
  • Mounting: bonded, molded or framed
  • Annual volume

Building a rangefinder or distance module? Send us your laser wavelength, temperature range and outline drawing, and we will recommend a passband and blocking level, and quote samples. Contact us