BPF1064-10nm,OD5
1,064 nm narrowband filter, 10 nm wide, with OD5 blocking across 350 to 1,200 nm outside the passband.
Need a different size or spec? We make custom versions.
BANDOPTIC spectrum engine
Interactive Spectrum
Plot and compare optical filter spectra. Catalog curves digitized from the supplied PDFs are approximate references; request measured data for specifications.
Catalog curves are approximate digital tracings of PDF graph images, not instrument CSV or guaranteed production-lot results. Some curves show only the plotted peak or cut-on edge; open the source graph for its full context. For approximate traces, OD values at or below 2% transmission are hidden because raster plots cannot verify blocking performance. Uploaded CSV files stay in your browser. Andover numerical curves will be added only when source data is available.
Technical Specifications
| Specification | Value |
|---|---|
| Center wavelength (CWL) | 1,064 ± 2 nm |
| Bandwidth (FWHM) | 10 ± 0.05 nm |
| Transmission | > 92% at 1,064 nm |
| Blocking | OD > 5 (average), 350–1,200 nm, outside the passband |
| Angle of incidence | 3 ± 2° |
| Cone half-angle | 3.5° |
| Substrate | Optical glass (K9 / B270) |
| Thickness | 1.0 ± 0.1 mm |
| Dimensional tolerance | +0 / −0.1 mm |
| Surface quality | 60-40 scratch-dig |
| Clear aperture | ≥ 90% of diameter |
Sizes
Need custom requirements? We cut to your drawing.
| Size | Thickness | Mount |
|---|---|---|
| Ø12.5 mm | 1.0 mm | Unmounted |
| Ø25 mm | 1.0 mm | Unmounted or ringed |
| 12.5 × 12.5 mm | 1.0 mm | Unmounted |
Other sizes and shapes are cut to order.
Choosing This Filter
BPF1064-10nm,OD5 is a 10 nm receiver filter for 1,064 nm LiDAR, designed for a 3° tilt, with more than 92% transmission and OD5 blocking across 350 to 1,200 nm outside the passband. Blocking out to 1,200 nm covers silicon detectors and the first part of the InGaAs range. A 10 nm band is a balance between rejecting sunlight and tolerating laser drift: wider than our 4 and 6 nm filters, narrower than our 30 and 40 nm ones. The printed width tolerance reads ±0.05 nm and is being confirmed. For a wider band, see BPF1064-30nm,OD5.
Customization Options
Need a different wavelength, width or blocking? We design it to order.
We can move the center wavelength anywhere from 200 to 2,500 nm, change the width, block deeper, up to OD6, or further into the infrared, and cut the filter to your size and thickness.
Tell us your light source, your detector and the numbers you need. We will reply with a recommended design and a quote, from a single prototype to production volumes.
See what we can make on our custom filters page. Learn more
Related Filters
FAQs
Can I tilt this filter?
This filter is designed to sit at a 3° tilt, ±2°. Mount it at that angle and it sits on its line. Tilting further moves the passband to shorter wavelengths. If your design needs a different angle, tell us and we will design for it.
How should I clean and store it?
Hold the filter by its edges. Blow off dust first, then wipe gently with lens tissue and reagent-grade isopropyl alcohol if needed. Store it dry, in its case, away from direct sunlight.
Can I get the measured curve with my order?
Yes. Ask for it when you order, and we include the measured transmission of your batch, as a chart and as a data file.
Don’t see the filter you need? Tell us about your system and we will suggest one or design it. Learn more